ERJP08J105V

1206 格式防浪涌电阻器，ERJP08 系列 - 5%Panasonic ERJ P08 防浪涌厚膜芯片电阻器由三层电极、金属釉厚膜电阻元件和保护涂层构成。 此结构确保高可靠性，同时支持回流和流动焊接。符合 AEC-Q200 0.66 W 高功率额定值 反浪涌 与标准膜式电阻器相比，具有卓越的浪涌特性 ### 应用这些芯片电阻器符合 AEC-Q200 标准，可用于汽车应用。 ### 标准IEC 60115-8, JIS C 5201-8, EIAK RC-2134### 厚膜 - 1206

1206 格式防浪涌器，ERJP08 系列 - 5%

ERJ P08 防浪涌厚膜芯片电阻器由三层电极、金属釉厚膜电阻元件和保护涂层构成。 此结构确保高可靠性，同时支持回流和流动焊接。

符合 AEC-Q200

0.66 W 高功率额定值

反浪涌

与标准膜式电阻器相比，具有卓越的浪涌特性

### 标准

IEC 60115-8, JIS C 5201-8, EIAK RC-2134

欧时:
Panasonic ERJP08 系列 0.66W 1MΩ 厚膜SMD 电阻器 ERJP08J105V, ±5%, ±200ppm/°C, 1206 封装

e络盟:
SMD片式电阻, 1206 [3216公制], 1 Mohm, ERJP08 Series, 500 V, 厚膜, 660 mW

艾睿:
Use this ERJ-P08J105V fixed single surface-mount resistor from Panasonic to obtain a visually clean layout. This part has a power rating of 0.667 2/3 W. This product has a resistance value of 1M Ohm. This resistor is also complete with an anti-surge control valve. Its temperature coefficient is ±200 ppm/°C. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. It has a tolerance of 5%. This device is made with thick film technology. This product is 3.2 mm long, 0.6 mm tall and 1.6 mm deep. This part has an operating temperature of -55 to 155 °C.

Allied Electronics:
Resistor; Thick Film; Res 1 Megohms; Pwr-Rtg 0.33 W; Tol 5%; SMT; 1206

安富利:
Res Thick Film 1206 1M Ohm 5% 1/3W ±200ppm/°C Molded SMD SMD Punched Carrier T/R