E-L6219DSA
数据手册.pdf步进电机驱动汽车范围 Stepper motor driver for automotive range
The L6219DSA is a bipolar monolithic integrated circuit intended to control and drive both windings of a bipolar stepper motor or bidirectionally control two DC motors.
With only a few external components, the L6219DSA controls and drives the circuit for LS-TTL or microprocessor-controlled stepper motor systems. The power stage is a dual full bridge sustaining 46 V and including four diodes for current recirculation.
Cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.
An internal pulse-width modulation PWM controls the output current to 750 mA with peak startup current up to 1 A.
A wide range of current control from 750 mA each bridge is permitted by two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. Thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
**Key Features**
- .
- Drives both windings of a bipolar stepper motor
- .
- Output current up to 750 mA for each winding
- .
- Wide voltage range: 10 V to 46 V
- .
- Half-step, full-step and microstepping mode
- .
- Built-in protection diodes
- .
- Internal PWM current control
- .
- Low output saturation voltage
- .
- Designed for unstabilized motor supply voltage
- .
- Internal thermal shutdown