DP83849ID

PHYTER 双路工业温度、光纤支持 FX、双端口 10/100 Mb/s 以太网物理层收发器

The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.

The is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849ID features two fully independent 10/100 ports for multi-port applications.

The DP83849ID provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. The device also provides flexibility by supporting both copper and fiber media.

In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance. In addition to the TDR scheme, commonly used for detecting faults during installation, NAONAL"s innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.

With the DP83849ID, National Semiconductor continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.

* * *

.

Low-power 3.3V, 0.18μm CMOS technology

.

Low power consumption

.

3.3V MAC Interface

.

Auto-MDIX for 10/100 Mb/s

.

Energy Detection Mode

.

Dynamic Integrity Utility

.

Dynamic Link Quality Monitoring

.

TDR based Cable Diagnostic and Cable Length Detection

.

Optimized Latency for Real Time Ethernet Operation

.

Reference Clock out

.

RMII Rev. 1.2 Interface configurable

.

SNI Interface configurable

.

MII Serial Management Interface MDC and MDIO

.

IEEE 802.3u MII

.

IEEE 802.3u Auto-Negotiation and Parallel Detection

.

IEEE 802.3u ENDEC, 10BASE-T transceivers and filters

.

IEEE 802.3u PCS, 100BASE-TX transceivers and filters

.

IEEE 802.3u 100BASE-FX Fiber Interface

.

IEEE 1149.1 JTAG

.

Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation

.

Programmable LED support for Link, 10 /100 Mb/s Mode, Activity, Duplex and Collision Detect

.

Single register access for complete PHY status

.

10/100 Mb/s packet BIST Built in Self Test

.

80-pin TQFP package 12mm x 12mm

* * *