DC1621A
数据手册.pdfEvaluation Board, Ltm8062 32V, 2A Battery Charger
demonstration board is to evaluate the performance of the LTM8062 uModule power tracking battery charger. The demonstration board is designed to operate from a 9.75V to 32V input source, and to charge a 2-cell battery pack to a fl oat voltage of 7.2V 7.2V. The float voltage can easily be changed to a higher or lower voltage by adjusting the resister values. The LTM8062 employ an input voltage regulation loop, which reduces charge current if the input voltage falls below a programmed level, set with a resistor divider. When the LTM8062 is powered by a solar panel, this input regulation loop is used to maintain the panel at peak output power. The LTM8062 also include preconditioning trickle charge, bad battery detection, a choice of termination schemes and automatic restart. Jumper on board allows for easy selection of C/10 or timer charge termination.