DS4303R+T&R
数据手册.pdf电压采样和保持无限 Voltage Sample and Infinite Hold
The DS4303R+T&R is a non-volatile NV electronically programmable voltage reference in 5 pin SOT-23 package. The reference voltage is programmed in device during factory calibration. Programming the reference voltage VOUT is as simple as applying desired voltage on VIN and toggling adjust pin ADJ to lock VOUT voltage level indefinitely even if the device is power cycled. The voltage reference replaces current cumbersome factory adjustment arrangements with a low cost solution that can be adjusted using automated techniques. In addition, the voltage reference has the ability to be readjusted after the unit has been fully assembled and tested. This results in a much more flexible manufacturing arrangement, lower inventory costs and a quicker time-to-market. This device is typically used in threshold setting, offset nulling, bias adjusting, factory calibrated equipment and pressure bridges.
- .
- Single supply operate from 2.4V to 3.6V
- .
- Precise electronically adjustable voltage reference, initial accuracy is 0.03%
- .
- Enables automated factory trimming of devices needing voltage adjustment
- .
- Adjusted within ±1mV
- .
- Wide adjustable output voltage range within 300mV of the supply rails
- .
- Output current drive is ±1mA
- .
- NV memory stores the voltage indefinitely
- .
- Output short circuit protection
- .
- Low temperature coefficient, low cost and low power consumption
- .
- Operating temperature range from -40°C to 85°C