DK-V7-VC709-G-J

开发套件, Virtex-7 FPGA, 连接, Vivado, 仅限日本

The from is a Virtex®-7 FPGA VC709 connectivity kit Japan specific. This Virtex®-7 FPGA VC709 connectivity kit is a 40Gb/s platform for high bandwidth and high performance applications containing all the necessary hardware, tools and IP to power quickly through evaluation and development of connectivity systems. This includes a 40Gb/s targeted reference design featuring PCI Express Gen 3, DMA IP core from Northwest Logic, 10GBase-R, AXI and virtual FIFO memory controller interfacing to an external DDR3 memory. To control and monitor this design kit includes a connectivity GUI built on Fedora Live OS which includes all the software drivers. Additionally kit contains two fibre optic cables and four transceiver modules leveraged by this design.

.

40Gb/s connectivity platform for bandwidth, performance applications using Virtex-7 VX690T FPGAs

.

Hardware, design tools, IP and pre-verified reference designs

.

Demonstrates an featuring 10GBase-R interfacing to external DDR3 memory

.

Advanced memory interface with two 4GB DDR3 SODIM memory up to 933MHz/1866Mbps

.

Enabling serial connectivity with PCIe Gen3x8, 4 SFP+, SMA Pairs and UART

.

Supports embedded processing with MicroBlaze, soft 32bit RISC

.

Develop networking and other serial applications with 4 SFP/SFP+ ports

.

Expand I/O with the FPGA Mezzanine Card FMC interface

.

Fixed Oscillator with differential 200MHz output clocking

.

On-board JTAG configuration circuitry to enable configuration over USB