B57891S0103F008
数据手册.pdfEPCOS B57891S0103F008 热敏电阻, NTC, 径向引线, 10KΩ
The is a 2-pin NTC Thermistor with rugged design, epoxy resin encapsulation and copper-clad Fe wire, tinned leads. This B57891S series through hole mounting thermistor has a lead wire may be bent at a minimum distance of twice the wire"s diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. Twisting torsion by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for temperature measurement and compensation.
- .
- 2.5mm Lead spacing
- .
- Bending radius should be at least 0.75mm
- .
- 200mW Maximum power
Do not store thermistors where they are exposed to heat or direct sunlight. Avoid contamination of thermistor surface during storage, handling and processing. Do not touch components with bare hands.
Gloves are recommended.