BB-BONE-CAM3-01
数据手册.pdf
Circuitco Electronics
主动器件
CIRCUITCO BB-BONE-CAM3-01 开发板, BEAGLEBONE系列, 附加摄像头3.1MP
is a BeagleBone 3.1MP Camera Cape provides a portable camera solution for BeagleBone. Each Camera Cape is composed of a Sensor board and an Expansion board. The Sensor board carries a 3.1 megapixel camera sensor and transmits captured image data to the Expansion board over camera interface CAM I/F. The Expansion board features a CSSP bridge connectivity device, which stores image data received from Sensor board and transfers them to the AM335x using general purpose memory controller GPMC interface.
- .
- Camera sensor 1/4 inch 3.1 megapixel Aptina MT9T111
- .
- CAM I/F, GPMC data interface
- .
- Power 3.3V/5V via expansion header
- .
- Two power LED indicators
- .
- Two 46 position BeagleBone connectors
- .
- One 10 position BeagleBone connector
- .
- Two pairs of 30 position Sensor board connectors
- .
- One 28 position camera sensor socket
- .
- Four layer board
- .
- EEPROM Support
BeagleBone 3.1MP Camera Cape should be used with LCD7 Cape or DVI-D Cape for previewing and capturing photos.