TDP158
6Gbps AC 耦合到 TMDS™/HDMI™ 转接驱动器 40-WQFN 0 to 85
The device is an AC-Coupled HDMI signal to transition-minimized differential signal TMDS Redriver supporting digital video interface DVI 1.0 and high-definition multimedia interface HDMI 1.4b and 2.0b output signals. The TDP158 supports four TMDS channels and Digital Display Control DDC interfaces. The TDP158 supports signaling rates up to 6 Gbps to allow for the highest resolutions of 4k2k60p 24 bits per pixel and up to WUXGA 16-bit color depth or 1080p with higher refresh rates. The TDP158 can be configured to support the HDMI2.0 standard.
The TDP158 supports dual power supply rails of 1.1 V on VDD and 3.3 V on VCC for power reduction. Several methods of power management are implemented to reduce overall power consumption. TDP158 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.
- .
- AC-Coupled Receiver Supporting AC-Coupled HDMI or DP++ Signaling Data Rates up to 6 Gbps
- .
- Transmitter is Compatible with HDMI TMDS Electrical Parameters up to 6 Gbps
- .
- Support 4k2k60p and up to WUXGA 16-bit Color Depth or 1080p with Higher Refresh Rates.
- .
- Programmable Fixed Receiver Equalizer up to 15 dB
- .
- Global or Independent High Speed Lane Control
- .
- I2C or Pin Strap Programmable
- .
- Transmitter Swing, Pre-emphasis, Slew Rate and Termination are Programmable by Pin Strapping or I2C
- .
- Configurable as a DisplayPort Redriver via I2C
- .
- 40-pin, 5 mm × 5 mm, 0.4 mm Pitch QFN Package
- .
- Extended Commercial Temperature Support 0°C – 85°C TDP158
- .
- Industrial Temperature support –40°C to 85°C TDP158I
- .
- Pin Compatible to the SN65/75DP159RSB Retimer
