3223J-1-102E

11-Turn 125mW 3mm Sealed Side Adjust 3223J SeriesSealed to withstand standard board wash processing Pick and place centring design for automated placement compatibility Flush adjustment screw Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint ### 多转贴片电容器

11 转 125mW 3mm 密封侧面调整 3223J 系列

封闭设计，可承受标准板清洗处理

采用拾放定心设计，可实现自动化放置兼容性。

嵌入式调整螺钉

符合 EIA/EIAJ/IPC/VECI SMD 标准微调印迹

得捷:
TRIMMER 1KOHM 0.125W J LEAD SIDE

欧时:
### 11-Turn 125mW 3mm Sealed Side Adjust 3223J SeriesSealed to withstand standard board wash processing Pick and place centring design for automated placement compatibility Flush adjustment screw Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint ### 多转贴片电容器

艾睿:
Optimization and calibration of resistance in a circuit has never been easier with this 3223J-1-102E potentiometer from Bourns! This part has a power rating of 0.125 1/8 W. This product has a resistance value of 1K Ohm. Its temperature coefficient is ±100 ppm/°C. Tape and reel packaging will encase this product during shipment, in order to ensure safe delivery and enable quick mounting of components. This product is 3.9 mm long and 4.47 mm. This part has an operating temperature of -65 to 150 °C. This device is made with cermet technology. It has a tolerance of 20%. The 3223J-1-102E part has a j-hook termination style.

Allied Electronics:
3mm Sq SMD Trimming Pot, MT Cermet, 1K

安富利:
Res Cermet Trimmer 1K Ohm 20% 1/8W 11ElecTurn 3.9 X 4.47mm J-Hook SMD Embossed T/R

Chip1Stop:
Res Cermet Trimmer 1K Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 4.47mm J-Hook SMD T/R

Verical:
Res Cermet Trimmer 1K Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 4.47mm J-Hook SMD T/R

Electro Sonic:
Res Cermet Trimmer 1K Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 4.47mm J-Hook SMD T/R