3223J-1-104E
数据手册.pdf11-Turn 125mW 3mm Sealed Side Adjust 3223J SeriesSealed to withstand standard board wash processing Pick and place centring design for automated placement compatibility Flush adjustment screw Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint ### 多转贴片电容器
11 转 125mW 3mm 密封侧面调整 3223J 系列
封闭设计,可承受标准板清洗处理
采用拾放定心设计,可实现自动化放置兼容性。
嵌入式调整螺钉
符合 EIA/EIAJ/IPC/VECI SMD 标准微调印迹
得捷:
TRIMMER 100K OHM 0.125W J LEAD
欧时:
### 11-Turn 125mW 3mm Sealed Side Adjust 3223J SeriesSealed to withstand standard board wash processing Pick and place centring design for automated placement compatibility Flush adjustment screw Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint ### 多转贴片电容器
贸泽:
Trimmer Resistors - SMD 3MM SQ MT CERMET TRIMMER
艾睿:
Not sure what resistance value you need? No problem, applying this 3223J-1-104E potentiometer from Bourns will allow you to change the resistance in a matter of seconds. This product has a resistance value of 100K Ohm. This dependable part has a power rating of 0.125 1/8 W. Its temperature coefficient is ±100 ppm/°C. Tape and reel packaging will encase this product during shipment, in order to ensure safe delivery and enable quick mounting of components. It has a tolerance of 20%. This part has an operating temperature of -65 to 150 °C. This device utilizes cermet technology. This product is 3.9 mm long and 4.47 mm. The 3223J-1-104E part has a j-hook termination style.
Allied Electronics:
3mm Sq SMD Trimming Pot, MT Cermet, 100K
安富利:
Res Cermet Trimmer 100K Ohm 20% 1/8W 11ElecTurn 3.9 X 4.47mm J-Hook SMD Embossed T/R
Chip1Stop:
Res Cermet Trimmer 100K Ohm 20% 0.125W1/8W 11ElecTurn 3.9 X 4.47mm J-Hook SMD Embossed T/R
Verical:
Res Cermet Trimmer 100K Ohm 20% 0.125W1/8W 11ElecTurns 3.96 X 4.47mm J-Hook SMD T/R