3223J-1-502E

11-Turn 125mW 3mm Sealed Side Adjust 3223J SeriesSealed to withstand standard board wash processing Pick and place centring design for automated placement compatibility Flush adjustment screw Meets EIA/EIAJ/IPC/VECI SMD standard trimmer footprint ### 多转贴片电容器

11 转 125mW 3mm 密封侧面调整 3223J 系列

封闭设计，可承受标准板清洗处理

采用拾放定心设计，可实现自动化放置兼容性。

嵌入式调整螺钉

符合 EIA/EIAJ/IPC/VECI SMD 标准微调印迹

得捷:
TRIMMER 5KOHM 0.125W J LEAD SIDE

欧时:
Bourns 3223J 系列 11 转 表面贴装 微调电阻器 3223J-1-502E, 带J 形钩接端, 5kΩ ±20%, 1/8W, ±100ppm/°C

艾睿:
Calibrate the resistance of a circuit with this 3223J-1-502E potentiometer from Bourns. This dependable part has a power rating of 0.125 1/8 W. This product has a resistance value of 5K Ohm. Its temperature coefficient is ±100 ppm/°C. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. This part has an operating temperature of -65 to 150 °C. The 3223J-1-502E part has a j-hook termination style. It has a tolerance of 20%. This device is made with cermet technology. This product is 3.9 mm long and 4.47 mm.

Allied Electronics:
3mm Sq SMD Trimming Pot, MT Cermet, 5K

安富利:
Res Cermet Trimmer 5K Ohm 20% 1/8W 11ElecTurn 3.9 X 4.47mm J-Hook SMD Embossed T/R

Chip1Stop:
Res Cermet Trimmer 5K Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 4.47mm J-Hook SMD T/R

Verical:
Res Cermet Trimmer 5K Ohm 20% 0.125W1/8W 11ElecTurns 3.96 X 4.47mm J-Hook SMD T/R

MASTER:
Res Cermet Trimmer 5K Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 4.47mm J-Hook SMD T/R

Electro Sonic:
Res Cermet Trimmer 5K Ohm 20% 0.125W1/8W 11ElecTurns 3.9 X 4.47mm J-Hook SMD T/R