TDA7719TR

3 BAND汽车音频处理器 3 band car audio processor

The TDA7719 is a high performance signal processor specifically designed for car radio applications. The device includes a high performance audioprocessor with fully integrated audio filters and new Soft Step architecture. The digital control allows programming in a wide range of filter characteristics. By the use of BCMOSprocess and liner signal processing low distortion and low noise are obtained.

**Key Features**

.

Offset detectionOffset voltage detection circuit for on-board power amplifier failure diagnosis

.

Mute functionsDirect muteDigitally controlled SoftMute with 4 programmable mute-times

.

Rear seat selectorFull source selector for rear seat output

.

Level meterProvide rectified level voltage of main source signal before loudness

.

Mixing selector

.

Speaker4 independent soft step speaker controls0dB to -79dB with 1dB stepsDirect mute

.

Treble2nd order frequency responseCenter frequency programmable in 4 steps-15 to 15dB range with 1dB resolution

.

Input multiplexerMultiple input configuration for different application

.

Volume+15 dB to -15 dB with 1 dB step resolutionSoft-step control with programmable blend times

.

Loudness2nd order frequency responseProgrammable center frequency15 dB with 1 dB stepsSelectable high frequency boostSelectable flat-mode

.

Middle2nd order frequency responseCenter frequency programmable in 4 stepsQ programmable 0.5/0.75/1.0/1.25-15 to 15dB range with 1dB resolution

.

Subwoofer2nd order low pass filter with programmable cut off frequency2 independent soft step level control,

.

Bass2nd order frequency responseCenter frequency programmable in 4 stepsQ programmable 1.0/1.25/1.5/2.0DC gain programmable-15 to 15 dB range with 1 dB resolution