MAX6775LTA+T

MAXIM INTEGRATED PRODUCTS  MAX6775LTA+T  芯片, 电池充电器

The is a low power, 1% accurate battery monitor in 6 pin UDFN package. This low power device is ideal for monitoring single lithium-ion Li+ cells or multicell alkaline/NiCd/NiMH power sources. It offers single low battery output and factory set hysteresis of 0.5%, 5%, or 10%. Hysteresis eliminates the output chatter some times which are associated with battery voltage monitors due to input voltage noise or battery terminal voltage recovery after load removal. It has an active-low output that asserts when the input falls below a set voltage. The MAX6775 single channel device is available with push-pull outputs. It is used in battery powered systems.

.

Supply voltage range is 1.2V to 5.5V at TA = -40°C to +85°C

.

Operating temperature range from -40°C to 85°C

.

Low battery current of 3µA

.

Low input leakage current allows use of large resistors

.

Valid low battery output logic state down to VBATT = 1V

.

Immune to short battery transients

.

Supply current of 4µA VBATT = 3.7V, no load and 3.2µA VBATT = 1.8V, no load

.

Propagation delay of 9µs and start-up time of 3ms VBATT rising above 1.6V