2007312-1

RJ_ point five_™ Connector SystemThe RJ_ point five_™ connector system is the next generation Ethernet link, offering a higher density cabling solution for those who desire a lower cost per port while maintaining the convenience of a single connector per channel. The port spacing is on a 7mm centreline, occupying half the space of that of traditional RJ45 Ethernet link. The receptacle and cable assembly have been redesigned to eliminate the undesirable RJ45 split pair configuration, resulting in heightened electrical performance. In addition, the latching feature incorporates an easy-to-use lanyard that will facilitate up to 96 ports on a single line card. Due to the density on the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing the port indicator light closer to the end user.Approximately double the density offered over the standard RJ45 Ethernet link Same footprint to support both integrated magnetic and non-integrated solutions Cable assemblies capable of field termination Product family will support Gigabit speeds of Cat5e UTP cable, and roadmap supports PoE+ and 10Gig over Cat6a Receptacle is a modular design to allow for easy and rapid deployment of product extensions Overall height is 25.25mm High density cabling consists of ergonomically friendly lanyard for easy extraction ### Receptacles:LAN category: Cat5e Contact plating: Gold Contact material: Phosphor bronze Connector mounting: PCB, right angle Termination method: Press fit ### RJ 适配器/耦合器/延长线

RJ_ point five_™ 系统

RJ point five 连接器系统是下一代以太网链路，为那些想要降低每个端口成本同时保持每通道单个连接器便捷性的用户提供高密度布线解决方案。端口间距位于 7 mm 中心线上，占用的空间是传统 RJ45 以太网链路的一半。插座和电缆组件均已重新设计，可消除不必要的 RJ45 分立对配置，产生更高的电气性能。此外，闭锁功能集成易于使用的系索，可在单一线路卡上支持多达 96 个端口。由于插座表面密度，LED 的光线可通过电缆护罩传出，使端口指示灯更接近最终用户。所有型号均高度可靠且质量极佳。

### 特点和优势

与标准 RJ45 以太网链路相比，密度约为其两倍 相同印迹，支持集成磁性和非集成解决方案

电缆组件可现场端接

该产品系列支持 5e 类 UTP 电缆的千兆位速度，路线图支持 PoE+ 和高于 6a 类的 10 Gb

插座采用模块化设计，允许轻松快速部署产品延长杆

总高度为 25.25 mm

高密度布线包括人体工程学友好型系索，易于拔插

### 插座：

局域网类别：5e 类

触点：镀金

触点材料：磷青铜

连接器安装：印刷电路板，直角

端接方法：压配合