MAX5304EUA+

MAXIM INTEGRATED PRODUCTS  MAX5304EUA+  数模转换器, 低功率, 10 bit, 串行, 4.5V 至 5.5V, µMAX, 8 引脚

The is a 10bit voltage-output digital to analogue converter DAC in 8 pin µMAX package. The DAC is an inverted R-2R ladder network that converts a digital input 10 data bits plus 3 sub-bits into an equivalent analogue output voltage in proportion to the applied reference voltage. It is easily addressed using simple 3-wire serial interface, it includes a 16bit shift register, double buffered input composed of an input register and a DAC register. In addition to the voltage output, the amplifier"s negative input is available to the user allowing specific gain configurations, remote sensing and high output current capability. It is used in digital offset and gain adjustment, microprocessor-controlled systems and remote industrial control.

.

Supply voltage range is 4.5V to 5.5V

.

Operating temperature range from -40°C to 85°C

.

Software shutdown and power-on reset

.

SPI/QSPI/MICROWIRE compatible

.

Schmitt-trigger digital inputs for direct optocoupler interface

.

10bit DAC with configurable output amplifier

.

Low supply current of 0.28mA normal operation, 4µA shutdown mode

.

INL is ±4LSB, DNL is ±1LSB, maximum PSRR of 800µV/V & voltage output slew rate is 0.6V/µs

.

Reference -3dB bandwidth of 650KHz at VREF = 0.67Vp-p

.

Start-up time of 20µs & SINAD of 77dB at VREF = 1Vp-p at 25KHz, code = full scale