MAX5384EUT+T

MAXIM INTEGRATED PRODUCTS  MAX5384EUT+T  数模转换器, 低功率, 8 bit, 串行, 4.5V 至 5.5V, SOT-23, 6 引脚

The is a low power, 8bit digital to analogue converter DAC with 3-wire serial interface in 6 pin SOT-23 package. This device has an internal +4V reference which require an extremely low supply current of only 150µA typ and provide a buffered voltage output. It power-up at zero code and remain there until a new code is written to the DAC registers. It provides additional safety for applications that drive valves or other transducers that need to be off on power-up. This device is used in automatic tuning VCO, power amplifier bias control, programmable threshold levels, automatic gain control and automatic offset adjustment.

.

Supply voltage range is 4.5V to 5.5V

.

Operating temperature range from -40°C to 85°C

.

Maximum supply current is 230µA at No load VDD = +4.5V to +5.5V

.

Maximum supply current is 1µA at shutdown mode VDD = +4.5V to +5.5V

.

Software-selectable output resistance during shutdown

.

Buffered output drives resistive loads, low-glitch power-on reset to zero DAC output

.

3-wire SPI/QSPI/MICROWIRE compatible interface

.

Maximum INL/DNL is < ±1LSB, full-scale error is < ±10% at code =255, no load

.

Three low-current shutdown modes

.

Offset error temperature coefficient is 3ppm/°C