L99DZ81EPTR
数据手册.pdfDoor Actuator Driver 64Pin TQFP T/R
The L99DZ81EP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to two DC motors and four grounded resistive loads can be driven with three half bridges and four high-side drivers. Four external MOS transistors in bridge configuration can be driven. The integrated SPI controls all operating modes forward, reverse, brake and high impedance. Also all diagnostic information is available via SPI read.
**Key Features**
- .
- One full bridge for 6 A load RON = 150 mΩ
- .
- One half bridges for 3 A load RON = 300 mΩ
- .
- One configurable high-side driver for up to 1.5 A RON = 500 mΩ or 0.35 A RON = 1600 mΩ load
- .
- One configurable high-side driver for 0.7 A RON = 800 mΩ or 0.35 A RON = 1600 mΩ load
- .
- Two high-side drivers for 0.5 A load RON = 1600 mΩ
- .
- Programmable softstart function to drive loads with higher inrush currents as current limitation value
- .
- Very low VS current consumption in standby mode IS < 6 μA typ; Tj ≤ 85°C
- .
- Current monitor output for all high-side drivers
- .
- Central two-stage charge pump
- .
- Motor bridge driver with full Rdson down to 6 V
- .
- Device contains temperature warning and protection
- .
- Open-load detection for all outputs
- .
- Overcurrent protection for all outputs
- .
- Separated half bridges for door lock motor
- .
- Programmable PWM control of all outputs
- .
- STM standard serial peripheral interface ST-SPI 3.1
- .
- Prepared for additional fail-safe path for H-bridge