A1324LUA-T

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra MicrosystemsThe Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively. Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.Temperature-stable quiescent output voltage and sensitivity Output voltage proportional to magnetic flux density Low-noise output increases accuracy Precise recoverability after temperature cycling Ratiometric rail-to-rail output Wide ambient temperature range: –40°C to 150°C Immune to mechanical stress Solid-state reliability Enhanced EMC performance for stringent automotive applications ### 霍尔效应传感器，Allegro Microsystems

带模拟输出的 A1324/5/6 线性霍尔效应传感器，Allegra Microsystems

Allegro A1324/5/6 线性霍尔效应传感器 IC 提供的电压输出与应用的磁场成比例。静态电压输出是电源电压的 50%，并且灵敏度分别预编程至 5.0 mV/g、3.125 mV/g 和 2.5 mV/g。

每个 IC 集成霍尔元件、温度补偿电路、小信号高增益放大器，以及夹紧低阻抗输出级和专有动态偏置抵消技术。

采用 3 引脚超微型 SIP 封装和 3 引脚表面安装 SOT-23 封装。

温度稳定静态输出电压和灵敏度

输出电压与磁通量密度成比例

低噪声输出可增加精确度

温度循环后可精确恢复

比例式轨对轨输出

宽环境温度范围：–40°C 至 150°C

抗机械应力

固态可靠性

增强 EMC 性能，用于要求严格的汽车应用

欧时:
Allegro Microsystems A1324LUA-T 霍尔效应传感器, 线性磁场, 4.5 → 5.5 V电源, 3引脚 SIP封装

得捷:
SENSOR HALL EFFECT ANALOG 3SIP

立创商城:
霍尔效应传感器

艾睿:
Hall Effect Sensor 10mA Monolithic 5V Automotive 3-Pin Ultra Mini SIP Bag

安富利:
Hall Effect Sensor 10mA Monolithic 5V 3-Pin SIP Bag

Chip1Stop:
Hall Effect Sensor Monolithic 5V 3-Pin SIP Bag

TME:
Sensor: Hall; Case: SIP3; Usup:4.5÷5.5VDC; Temp: -40÷150°C

Verical:
Hall Effect Sensor 10mA Monolithic 5V Automotive 3-Pin Ultra Mini SIP Bag

Newark:
Hall Effect Sensor, Linear, 10 mA, SIP, 3 Pins, 4.5 V, 5.5 V