ZWXHA03

Power Supply; Cable Assy ZWX

The ZWX Series can be used in ambient temperatures from -10°C to + 70°C with operation at 100% load from -10°C to 50°C. This specification is unique to the World"s No.1 provider of industrial power supplies.

**Features:

* ** Operating time at peak output is less than 5sec.

Average output power and current are less than maximum output power and current.

**

* ** At total output power Forced air V1=6.5A, V2=6.5A, V3=7.7A, V4=0.2A, V5=1.0A, Ta=25?.

**

* ** At total output power Forced air.

**

* ** For cases where conformance to various safety specs UL, CSA, EN are required, to be described as 100 - 240VAC 50/60Hz.

**

* ** Not applicable for the inrush current to Noise Filter for less than 0.2ms.

**

* ** Please refer to Fig. A for measurement of line & load regulation and ripple voltage.

**

* ** 85 - 265VAC, constant load.

**

* ** No load-Full load, constant input voltage.

**

* ** Avoid to operate at overload or short circuit condition for more than 30 seconds.

V1, V2, V3 : OCP circuit will shut down output except V5 with delay more than 5s, manual reset PS_ON reset or re power on.

V4 : Constant current limit with automatic recovery.

V5 : Constant current limit in conjunction with all output with automatic recovery.

**

* ** OVP circuit will shut down output, manual reset PS_ON reset or re power on.

**

* ** Measured by the each measuring method of UL, CSA, EN and DENAN at 60Hz, Ta=25?.

**

* ** At forced air cooling, standard mounting. Refer to output derating curve.