锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

VNH3ASP30TR-E

VNH3ASP30TR-E

数据手册.pdf

汽车完全集成H桥电机驱动器 AUTOMOTIVE FULLY INTEGRATED H-BRIDGE MOTOR DRIVER

The VNH3ASP30-E is a full-bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver HSD and two low-side switches. The HSD switch is designed using STMicroelectronics proprietary VIPower™ M0 technology that efficiently integrates a true Power MOSFET with an intelligent signal/protection circuit on the same die.

The low-side switches are vertical MOSFETs manufactured using STMicroelectronics proprietary EHD “STripFET™” process.The three circuits are assembled in a MultiPowerSO-30 package on electrically isolated lead frames. This package, specifically designed for the harsh automotive environment, offers improved thermal performance thanks to exposed die pads. Moreover, its fully symmetrical mechanical design provides superior manufacturability at board level. The input signals INA and INB can directly interface with the microcontroller to select the motor direction and the brake condition. Pins DIAGA/ENA or DIAGB/ENB, when connected to an external pull-up resistor, enable one leg of the bridge. They also provide a feedback digital diagnostic signal. The normal condition operation is explained in the truth table. The CS pin monitors the motor current by delivering a current proportional to its value. The speed of the motor can be controlled in all possible conditions by the PWM up to 20 kHz. In all cases, a low level state on the PWM pin will turn off both the LSA and LSB switches. When PWM rises to a high level, LSA or LSB turn on again depending on the input pin state.

**Key Features**

.
AEC-100 qualified
.
5 V logic level compatible inputs
.
Undervoltage and overvoltage shutdown
.
Overvoltage clamp
.
Thermal shut down
.
Cross-conduction protection
.
Linear current limiter
.
Very low standby power consumption
.
PWM operation up to 20 kHz
.
Protection against loss of ground and loss of VCC
.
Current-sense output proportional to motor current
.
Package: ECOPACK®
VNH3ASP30TR-E中文资料参数规格
技术参数

输出接口数 1

输出电流 30 A

工作温度Max 150 ℃

工作温度Min -40 ℃

电源电压 5.5V ~ 16V

封装参数

安装方式 Surface Mount

引脚数 30

封装 MPSO-30

外形尺寸

封装 MPSO-30

物理参数

工作温度 -40℃ ~ 150℃ TJ

其他

产品生命周期 Active

包装方式 Tape & Reel TR

制造应用 汽车级

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

海关信息

ECCN代码 EAR99

VNH3ASP30TR-E引脚图与封装图
暂无图片
在线购买VNH3ASP30TR-E
型号 制造商 描述 购买
VNH3ASP30TR-E ST Microelectronics 意法半导体 汽车完全集成H桥电机驱动器 AUTOMOTIVE FULLY INTEGRATED H-BRIDGE MOTOR DRIVER 搜索库存
替代型号VNH3ASP30TR-E
图片 型号/品牌/封装 代替类型 描述 替代型号对比

型号: VNH3ASP30TR-E

品牌: ST Microelectronics 意法半导体

封装: MultiPowerSO-30

当前型号

汽车完全集成H桥电机驱动器 AUTOMOTIVE FULLY INTEGRATED H-BRIDGE MOTOR DRIVER

当前型号

型号: VNH3ASP30-E

品牌: 意法半导体

封装: SOIC 5.5V 30A

功能相似

STMICROELECTRONICS  VNH3ASP30-E  双路电机芯片, 全桥, 5.5V-36V电源, 30A输出, 250µs延迟, SOIC-30

VNH3ASP30TR-E和VNH3ASP30-E的区别