TS3USB221A-Q1
ESD保护,高速USB 2.0 ( 480 Mbps)的1:单ENABLE 2复用器/解复用器开关 ESD PROTECTED, HIGH-SPEED USB 2.0 480-Mbps 1:2 MULTIPLEXER/DEMULTIPLEXER SWITCH WITH SINGLE ENABLE
The is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in automotive USB hubs or controllers with limited USB I/Os. The wide bandwidth 900 MHz of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 480 Mbps.
The TS3USB221A-Q1 integrates ESD protection cells on all pins, is available in a tiny UQFN package 2 mm × 1.5 mm and is characterized over the free air temperature range from –40°C to 125°C.
- .
- Qualified for Automotive Applications
- .
- AEC-Q100 Qualified With the Following Results:
- .
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- .
- Device HBM ESD Classification Level H2
- .
- Device CDM ESD Classification Level C5
- .
- VCC Operation at 2.5 V to 3.3 V
- .
- VI/O Accepts Signals Up to 5.5 V
- .
- 1.8-V Compatible Control-Pin Inputs
- .
- Low-Power Mode When OE Is Disabled 1 µA
- .
- rON = 16 Ω Maximum
- .
- ΔrON = 0.2 Ω Typical
- .
- Cioon = 6 pF Typical
- .
- Low Power Consumption 30 µA Maximum
- .
- High Bandwidth 900 MHz Typical
- .
- ESD Performance Tested Per JESD 22
- .
- 7000-V Human-Body Model
A114-B, Class II
- .
- 1000-V Charged-Device Model C101
- .
- ESD Performance I/O to GND Per JESD 22
- .
- 12-kV Human-Body Model
- .
- APPLICA ONS
- .
- Routing High Speed USB Signals
- .
- Automotive USB Hubs
- .
- Phone-Controlled Automotive Infotainment
All other trademarks are the property of their respective owners