TJA1052IT/2Y

2.5KV隔离CAN（FD）收发器 5M波特率 可兼容替代TJA1050T、TJA1051T、TJA1040T

Overview

The TJA1052i is a high-speed CAN transceiver that provides a galvanically isolated interface between a Controller Area Network CAN protocol controller and the physical two-wire CAN bus. The TJA1052i is specifically targeted at Electric Vehicles EV and Hybrid Electric Vehicles HEV, where galvanic isolation barriers are needed between the high- and low-voltage parts.

**Safety:** Isolation is required for safety reasons, eg. to protect humans from electric shock or to prevent the electronics being damaged by high voltages.

**Signal integrity:** The isolator uses proprietary capacitive isolation technology to transmit and receive CAN signals. This technology enables more reliable data communications in noisy environments, such as high-voltage battery management systems or the drive and regeneration systems in EVs and HEVs.

**Performance:** The transceiver is designed for high-speed CAN applications in the automotive industry, supplying the differential transmit and receive capability to a CAN protocol controller in a microcontroller. Integrating the galvanic isolation along with the transceiver in the TJA1052i removes the need for stand-alone isolation. It also improves reliability and system performance parameters such as loop delay.

The TJA1052i belongs to the third generation of high-speed CAN transceivers from Semiconductors, offering significant improvements over first- and second-generation devices. It offers improved ElectroMagnetic Compatibility EMC and ElectroStatic Discharge ESD performance, and also features ideal passive behavior to the CAN bus when the transceiver supply voltage is off.

The TJA1052i implements the CAN physical layer as defined in the current ISO11898 standard ISO11898-2:2003. Pending the release of ISO11898-2:2016 including CAN FD and SAE J2284-4/5, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s.

The TJA1052i is an excellent choice for all types of automotive and industrial CAN networks where isolation is required for safety reasons or to enhance signal integrity in noisy environments.

MoreLess

## Features

### General

* Isolator and Transceiver integrated into a single SO16 package, reducing board space

* ISO 11898-2:2003 compliant

* Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase

* Flawless cooperation between the Isolator and the Transceiver

* Fewer components improves reliability in applications

* Guaranteed performance eg. max loop delay <220 ns

* Electrical transient immunity of 45 kV/μs typ

* AEC-Q100 qualified

* Suitable for use in 12 V and 24 V systems; compatible with 3 V to 5 V microcontrollers

* Bus common mode voltage Vcm = ±25 V

* Low ElectroMagnetic Emission EME and high ElectroMagnetic Immunity EMI

* Dark green product halogen free and Restriction of Hazardous Substances RoHS compliant

### Power management

* Functional behavior predictable under all supply conditions

* Transceiver disengages from the bus when not powered up zero load

### Protection

* Up to 5 kV RMS rated isolation

* Three versions available 1 kV, 2.5 kV and 5 kV

* Voltage compliant with UL 1577, IEC 61010 and IEC 60950

* 5 kV RMS rated isolation voltage compliant with UL 1577, IEC 61010 and IEC 60950

* Supports ISO6469 ‘Electrically propelled road vehicles. Safety specifications.’

* High ESD handling capability on the bus pins

* Bus pins protected against transients in automotive environments

* Transmit Data TXD dominant time-out function

* Undervoltage detection on supply pins

## Features