SPC58NE84C3QMHAR

PowerPC系列 180MHz 6MB 608KB

This document provides electrical specifications, pin assignments, and package diagrams for the SPC5x series of microcontroller units MCUs. For functional characteristics, see the SPC5x microcontroller reference manual.

The SPC58xEx microcontroller is the first in a new family of devices superseding the SPC5x family. SPC58xEx builds on the legacy of the SPC5x family, while introducing new features coupled with higher throughput to provide substantial reduction of cost per feature and significant power and performance improvement MIPS per mW.

**Key Features**

.

AEC-Q100 qualified

.

32-bit Power Architecture VLE compliant CPU cores:

.

Three main CPUs, dual issue, 32-bit CPU core complexes e200z4, two of them having one checker core in lock-step

.

Floating Point, End-to-End Error Correction

.

6576 KB 6288 KB code flash + 288 KB data flash on-chip flash memory:

.

supports read during program and erase operations, and multiple blocks allowing EEPROM emulation

.

Supports read while read between the two code Flash partitions.

.

608 KB on-chip general-purpose SRAM in addition to 160 KB core local data RAM

.

96-channel direct memory access controller eDMA

.

Comprehensive new generation ASIL-D safety concept:

.

ASIL-D of ISO 26262

.

FCCU for collection and reaction to failure notifications

.

Memory Error Management Unit MEMU for collection and reporting of error events in memories

.

Cyclic redundancy check CRC unit

.

Dual-channel FlexRay controller

.

Hardware Security Module HSM

.

Junction temperature range -40 °C to 165 °C

.

GTM 343 - Generic Timer Module:

.

Intelligent complex timer module

.

144 channels 40 input and 104 output

.

5 programmable fine grain multi-threaded cores

.

24-bit wide channels

.

Enhanced analog-to-digital converter system with:

.

1 supervisor 12-bit SAR analog converter

.

4 separate fast 12-bit SAR analog converters

.

3 separate 10-bit SAR analog converters, one with STDBY mode support

.

6 separate 16-bit Sigma-Delta analog converters

.

Communication interfaces:

.

18 LINFlexD modules

.

10 deserial serial peripheral interface DSPI modules

.

8 MCAN interfaces with advanced shared memory scheme and ISO CAN-FD support, one supporting time-triggered controller area network TTCAN

.

Two Ethernet controller 10/100 Mbps, compliant IEEE 802.3-2008

.

Flexible Power Supply options:

.

External Regulators 1.2 V core, 3.3 V–5 V IO

.

Single internal SMPS regulator eLQFP176

.

Single internal Linear Regulator with external ballast FPBGA292

.

Nexus development interface NDI per IEEE-ISTO 5001-2003 standard, with some support for 2010 standard

.

Boot assist Flash BAF supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART