SPC563M60L5COAR

MCU 32Bit SPC563M60x e200z3 RISC 1Mb Flash 1.2V/3.3V/5V 144Pin LQFP T/R

These 32-bit automotive microcontrollers are a family of System-on-Chip SoC devices that contain many new features coupled with high performance 90 nm CMOS technology to provide substantial reduction of cost per feature and significant performance improvement. The advanced and cost-efficient host processor core of this automotive controller family is built on Power Architecture® technology. This family contains enhancements that improve the architecture’s fit in embedded applications, includes additional instruction support for Digital Signal Processing DSP, integrates technologies—such as an enhanced time processor unit, enhanced queued analog-to-digital converter, Controller Area Network, and an enhanced modular input-output system—that are important for today’s lower-end powertrain applications. The device has a single level of memory hierarchy consisting of up to 94 KB on-chip SRAM and up to 1.5 MB of internal flash memory. The device also has an External Bus Interface EBI for ‘calibration’.

**Key Features**

.

Single issue, 32-bit Power Architecture® Book E compliant e200z335 CPU core complex

.

Includes Variable Length Encoding VLE enhancements for code size reduction

.

32-channel Direct Memory Access controller DMA

.

Interrupt Controller INTC capable of handling 364 selectable-priority interrupt sources: 191 peripheral interrupt sources, 8 software interrupts and 165 reserved interrupts.

.

Frequency-Modulated Phase-Locked Loop FMPLL

.

Calibration External Bus Interface EBI1

.

System Integration Unit SIU

.

Up to 1.5 Mbyte on-chip Flash with Flash controller

.

Fetch Accelerator for single cycle Flash access @80 MHz

.

Up to 94 Kbyte on-chip static RAM including up to 32 Kbyte standby RAM

.

Boot Assist Module BAM

.

32-channel second-generation enhanced Time Processor Unit eTPU

.

32 standard eTPU channels

.

Architectural enhancements to improve code efficiency and added flexibility

.

16-channels enhanced Modular Input-Output System eMIOS

.

Enhanced Queued Analog-to-Digital Converter eQADC

.

Decimation filter part of eQADC

.

Silicon die temperature sensor

.

2 Deserial Serial Peripheral Interface DSPI modules compatible with Microsecond Bus

.

2 enhanced Serial Communication Interface eSCI modules compatible with LIN

.

2 Controller Area Network FlexCAN modules that support CAN 2.0B

.

Nexus Port Controller NPC per IEEE-ISTO 5001-2003 standard

.

IEEE 1149.1 JTAG support

.

Nexus interface

.

On-chip voltage regulator controller that provides 1.2 V and 3.3 V internal supplies from a 5 V external source.

.

Designed for LQFP144, and LQFP176