SN74HC573A-Q1

具有三态输出的汽车类八路透明 D 类锁存器

This octal transparent D-type latch features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

While the latch-enable LE input is high, the Q outputs respond to the data D inputs. When LE is low, the outputs are latched to retain the data that was set up.

A buffered output-enable OE input can be used to place the eight outputs in either a normal logic state high or low logic levels or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

.

Qualified for Automotive Applications

.

Wide Operating Voltage Range of 2 V to 6 V

.

High-Current 3-State Outputs Drive Bus Lines Directly or up to 15 LSTTL Loads

.

Low Power Consumption, 80-µA Max ICC

.

Typical tpd = 21 ns

.

±6-mA Output Drive at 5 V

.

Low Input Current of 1 µA Max

.

Bus-Structured Pinout