SSM2315CBZ-REEL

无滤波器，高效率，单声道3瓦D类音频放大器 Filterless, High Efficiency, Mono 3 W Class-D Audio Amplifier

Product Details

The SSM2315 is a fully integrated, high efficiency, Class-D audio amplifier. It is designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.5 V supply. It is capable of delivering 3 W of continuous output power with <1% THD + N driving a 3 Ω load from a 5.0 V supply.

The SSM2315 features a high efficiency, low noise modulation scheme that requires no external LC output filters. The modulation continues to provide high efficiency even at low output power. It operates with 93% efficiency at 1.4 W into 8 Ω or 85% efficiency at 3 W into 3 Ω from a 5.0 V supply and has an SNR of >103 dB. Spread-spectrum pulse density modulation is used to provide lower EMI-radiated emissions compared with other Class-D architectures.

The SSM2315 has a micropower shutdown mode with a typical shutdown current of 20 nA. Shutdown is enabled by applying a logic low to the SD pin.

The device also includes pop-and-click suppression circuitry. This suppression circuitry minimizes voltage glitches at the output during turn-on and turn-off, reducing audible noise on activation and deactivation.

The fully differential input of the SSM2315 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.

The default gain of the SSM2315 is 6 dB, but users can reduce the gain by using a pair of external resistors.

The SSM2315 is specified over the industrial temperature range of −40°C to +85°C. It has built-in thermal shutdown and output short-circuit protection. It is available in a 9-ball, 1.5 mm × 1.5 mm wafer level chip scale package WLCSP.

**Applications**

.

Mobile phones

.

MP3 players

.

Portable gaming

.

Portable electronics

.

Educational toys

### Features and Benefits

.

Filterless Class-D amplifier with Σ-Δ modulation

.

No sync necessary when using multiple Class-D amplifiers from Analog Devices, Inc.

.

3 W into 3 Ω load and 1.4 W into 8 Ω load at 5.0 V supply with <1% total harmonic distortion THD + N

.

93% efficiency at 5.0 V, 1.4 W into 8 Ω speaker

.

>103 dB signal-to-noise ratio SNR

.

Single-supply operation from 2.5 V to 5.5 V

.

20 nA ultralow shutdown current

.

Short-circuit and thermal protection

.

Available in 9-ball, 1.5 mm × 1.5 mm WLCSP

.

Pop-and-click suppression

.

Built-in resistors reduce board component count

.

Default fixed 6 dB or user adjustable gain setting