ST2329QTR
数据手册.pdf没有方向控制引脚2位双电源电平转换器 2-bit dual supply level translator without direction control pin
Description
The ST2329 is a 2-bit dual supply level translator which provides the level shifting capability to allow data transfer in a multi-voltage system. Externally applied voltages, VCC and VL, set the logic levels on either side of the device. It utilizes transmission gate-based design that allows bidirectional level translation without a control pin.
Features
■ 90 Mbps max data rate when driven by a totem pole driver
■ 8 Mbps max data rate when driven by an open drain pole driver
■ Bidirectional level translation without direction control pin
■ Wide VL voltage range of 1.65 to 3.6 V
■ Wide VCC voltage range of 1.80 to 5.5 V
■ Power down mode feature – when either supply is off, all I/Os are in high impedance
■ Low quiescent current max 12 µA
■ Able to be driven by totem pole and open drain drivers
■ 5.5 V tolerant enable pin
■ ESD performance on all pins: ±2 kV HBM
■ Small package and footprint QFN10L 1.8 x 1.4 mm package
Applications
■ Low voltage system level translation
■ Mobile phones and other mobile devices
■ I2C level translation
■ UART level translation