STM6601BM2DDM6F
数据手册.pdfSTM6601 系列 3.1 V 智能 按键 开/关 控制器 带智能复位™ -TDFN-12
The STM6600-01 devices monitor the state of connected push-buttons as well as sufficient supply voltage. An enable output controls power for the application through the MOSFET transistor, DC-DC converter, regulator, etc. If the supply voltage is above a precise voltage threshold, the enable output can be asserted by a simple press of the button. Factory-selectable supply voltage thresholds are determined by highly accurate and temperature-compensated references. An interrupt is asserted by pressing the push-button during normal operation and can be used to request a system power-down. The interrupt is also asserted if undervoltage is detected. By a long push of one button PB or two buttons PBand SR either a reset is asserted or power for the application is disabled depending on the option used.
The device also offers additional features such as precise 1.5 V voltage reference with very tight accuracy of 1%, separate output indicating undervoltage detection and separate output for distinguishing between interrupt by push-button or undervoltage.
The device consumes very low current of 6 μA during normal operation and only 0.6 μA current during standby.
The STM6600-01 is available in the TDFN12 package and is offered in several options among features such as selectable threshold, hysteresis, timeouts, output types, etc.
**Key Features**
- .
- Operating voltage 1.6 V to 5.5 V
- .
- Low standby current of 0.6 μA
- .
- Adjustable Smart Reset™ assertion delay time driven by external CSRD
- .
- Power-up duration determined primarily by push-button press STM6600 or by fixed time period, tON_BLANK STM6601
- .
- Debounced PB and SR inputs
- .
- PB and SR ESD inputs withstand voltage up to ±15 kV air discharge ±8 kV contact discharge
- .
- Active high or active low enable output option EN or EN provides control of MOSFET, DC-DC converter, regulator, etc.
- .
- Secure startup, interrupt, Smart Reset™ or power-down driven by push-button
- .
- Precise 1.5 V voltage reference with 1% accuracy
- .
- Industrial operating temperature –40 to +85 °C
- .
- Available in TDFN12 2 x 3 mm package