STR711FR1T6
数据手册.pdfSTR71 系列 32位 128 kB 闪存 32 kB RAM ARM 微控制器 - LQFP-64
ARM® core with embedded Flash and RAM
The STR71x series is a family of ARM-powered 32-bit microcontrollers with embedded Flash and RAM. It combines the high performance ARM7TDMI CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STR71xF devices have on-chip high-speed single voltage FLASH memory and high-speed RAM. STR710R devices have high-speed RAM but no internal Flash. The STR71x family has an embedded ARM core and is therefore compatible with all ARM tools and software.
Extensive tools support
STMicroelectronics’ 32-bit, ARM core-based microcontrollers are supported by a complete range of high-end and low-cost development tools to meet the needs of application developers. This extensive line of hardware/software tools includes starter kits and complete development packages all tailored for ST’s ARM core-based MCUs. The range of development packages includes third-party solutions that come complete with a graphical development environment and an in-circuit emulator/programmer featuring a JTAG application interface. These support a range of embedded operating systems OS, while several royalty-free OSs are also available.
For more information, please refer to ST MCU site http://www.st.com/mcu
**Key Features**
- .
- Core
- .
- ARM7TDMI 32-bit RISC CPU
- .
- 59 MIPS @ 66 MHz from SRAM
- .
- 45 MIPS @ 50 MHz from Flash
- .
- Memories
- .
- Up to 256 Kbytes Flash program memory 10 kcycles endurance, 20 years retention @ 85 ° C
- .
- 16 Kbytes Flash data memory 100 kcycles endurance, 20 years retention@ 85 ° C
- .
- Up to 64 Kbytes RAM
- .
- External Memory Interface EMI for up to 4 banks of SRAM, Flash, ROM
- .
- Multi-boot capability
- .
- Clock, reset and supply management
- .
- 3.0 to 3.6 V application supply and I/Os
- .
- Internal 1.8 V regulator for core supply
- .
- Clock input from 0 to 16.5 MHz
- .
- Embedded RTC osc. running from external 32 kHz crystal
- .
- Embedded PLL for CPU clock
- .
- Realtime Clock for clock-calendar function
- .
- 5 power saving modes: SLOW, WAIT, LPWAIT, STOP and STANDBY modes
- .
- Nested interrupt controller
- .
- Fast interrupt handling with multiple vectors
- .
- 32 vectors with 16 IRQ priority levels
- .
- 2 maskable FIQ sources
- .
- Up to 48 I/O ports
- .
- 30/32/48 multifunctional bidirectional I/OsUp to 14 ports with interrupt capability
- .
- 5 timers
- .
- 16-bit watchdog timer
- .
- 3 16-bit timers with 2 input captures, 2 output compares, PWM and pulse counter
- .
- 16-bit timer for timebase functions
- .
- 10 communication interfaces
- .
- 2 I2C interfaces 1 multiplexed with SPI
- .
- 4 UART asynchronous serial interfaces
- .
- Smartcard ISO7816-3 interface on UART1
- .
- 2 BSPI synchronous serial interfaces
- .
- CAN interface 2.0B Active
- .
- USB Full Speed 12 Mbit/s Device Function with Suspend and Resume
- .
- HDLC synchronous communications
- .
- 4-channel 12-bit A/D converter
- .
- Sampling frequency up to 1 kHz
- .
- Conversion range: 0 to 2.5 V
- .
- Development tools support
- .
- Atomic bit SET and RES operations