SPC56AP60L3BEFBY
数据手册.pdfARM微控制器 - MCU 32-bit Power Architecture MCU for Automotive Chassis and Safety Applications
This 32-bit system-on-chip SoC automotive microcontroller family is the latest achievement in integrated automotive application controllers. It belongs to an expanding range of automotive-focused products designed to address chassis applications specifically the airbag application.
**Key Features**
- .
- 64 MHz, single issue, 32-bit CPU core complex e200z0h
- .
- Compliant with Power Architecture® embedded category
- .
- Variable Length Encoding VLE
- .
- Memory organizazion
- .
- Up to 1024 KB on-chip code Flash memory with additional 64 KB for EEPROM emulation data flash, with ECC, with erase/program controller
- .
- Up to 80 KB on-chip SRAM with ECC
- .
- Fail safe protection
- .
- ECC protection on system SRAM and Flash
- .
- Safety port
- .
- SWT with servicing sequence pseudo-random generator
- .
- Power management
- .
- Non-maskable interrupt for both cores
- .
- Fault collection and control unit FCCU
- .
- Safe mode of system-on-chip SoC
- .
- Register protection scheme
- .
- Nexus® L2+ interface
- .
- Single 3.3 V or 5 V supply for I/Os and ADC
- .
- 2 on-platform peripherals set with 2 INTC
- .
- 16-channel eDMA controller with multiple transfer request sources
- .
- General purpose I/Os 80 GPIO + 26 GPI on LQFP144; 49 GPIO + 16 GPI on LQFP100
- .
- 2 general purpose eTimer units
- .
- 6 timers, each with up/down count capabilities
- .
- 16-bit resolution, cascadable counters
- .
- Quadrature decode with rotation direction flag
- .
- Double buffer input capture and output compare
- .
- Communications interfaces
- .
- 2 LINFlex modules LIN 2.1, 1 × Master/Slave, 1 × Master Only
- .
- 5 DSPI modules with automatic chip select generation
- .
- 2 FlexCAN interfaces 2.0B Active with 32 message buffers
- .
- 1 Safety port based on FlexCAN; usable as third CAN when not used as safety port
- .
- 1 FlexRay™ module V2.1 with dual or single channel, 64 message buffers and up to 10 Mbit/s
- .
- 2 CRC units with three contexts and 3 hardwired polynomialsCRC8,CRC32 and CRC-16-CCITT
- .
- 10-bit A/D converter
- .
- 27 input channels and pre-sampling feature
- .
- Conversion time < 1 μs including sampling time at full precision
- .
- Programmable cross triggering unit CTU
- .
- 4 analog watchdog with interrupt capability
- .
- On-chip CAN/UART Bootstrap loader with boot assist module BAM
- .
- Ambient temperature ranges: –40 to 125 °C or –40 to 105 °C