SPC560P40L1BEABR

MCU 32Bit SPC560P40x e200z0h RISC 256KB Flash 3.3V 64Pin LQFP T/R

This 32-bit system-on-chip SoC automotive microcontroller family is the latest achievement in integrated automotive application controllers. It belongs to an expanding range of automotive-focused products designed to address chassis applications—specifically, electrical hydraulic power steering EHPS and electric power steering EPS—as well as airbag applications.

This family is one of a series of next-generation integrated automotive microcontrollers based on the Power Architecture technology.

The advanced and cost-efficient host processor core of this automotive controller family complies with the Power Architecture embedded category. It operates at speeds of up to 64 MHz and offers high performance processing optimized for low power consumption. It capitalizes on the available development infrastructure of current Power Architecture devices and is supported with software drivers, operating systems and configuration code to assist with users implementations.

**Key Features**

.

Up to 64 MHz, single issue, 32-bit CPU core complex e200z0h

.

Compliant with Power Architecture® embedded category

.

Variable Length Encoding VLE

.

Memory organization

.

Up to 256 KB on-chip code flash memory with ECC and erase/program controller

.

Additional 64 4 × 16 KB on-chip data flash memory with ECC for EEPROM emulation

.

Up to 20 KB on-chip SRAM with ECC

.

Fail-safe protection

.

Programmable watchdog timer

.

Non-maskable interrupt

.

Fault collection unit

.

Nexus Class 1 interface

.

Interrupts and events

.

16-channel eDMA controller

.

16 priority level controller

.

Up to 25 external interrupts

.

PIT implements four 32-bit timers

.

120 interrupts are routed via INTC

.

1 general purpose eTimer unit

.

6 timers each with up/down capabilities

.

16-bit resolution, cascadable counters

.

Quadrature decode with rotation direction flag

.

Double buffer input capture and output compare

.

GPIO 37 on LQFP64; 64 on LQFP100 individually programmable as I/O or special function

.

Communications interfaces

.

2 LINFlex channels 1× Master/Slave, 1× Master only

.

Up to 3 DSPI channels with automatic chip select generation up to 8/4/4 chip selects

.

Up to 2 FlexCAN interface 2.0B Active with 32 message buffers

.

1 safety port based on FlexCAN with 32 message buffers and up to 8 Mbit/s at 64 MHz capability usable as second CAN when not used as safety port

.

One 10-bit analog-to-digital converter ADC

.

Up to 16 input channels 16 on LQFP100 / 12 on LQFP64

.

Conversion time < 1 μs including sampling time at full precision

.

Programmable Cross Triggering Unit CTU

.

4 analog watchdogs with interrupt capability

.

On-chip CAN/UART bootstrap loader with Boot Assist Module BAM

.

1 FlexPWM unit: 8 complementary or independent outputs with ADC synchronization signals