STM32L100RCT6TR

ARM Cortex-M3 32MHz 闪存：256K@x8bit RAM：16KB

The ultra-low-power STM32L100RC device incorporates the connectivity power of the universal serial bus USB with the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz 33.3 DMIPS, a memory protection unit MPU, high-speed embedded memories Flash memory up to 256 Kbytes and RAM up to 16 Kbytes and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The STM32L100RC device offers one 12-bit ADC, two DACs, two ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L100RC device contains standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, three USARTs, and an USB.

It also includes a real-time clock and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.

The ultra-low-power STM32L100RC device operates from a 1.8 to 3.6 V power supply down to 1.65 V at power down with BOR and from a 1.65 to 3.6 V power supply without BOR option. It is available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.

**Key Features**

.

Ultra-low-power platform

.

1.65 V to 3.6 V power supply

.

-40 °C to 105 °C temperature range

.

0.29 µA Standby mode 3 wakeup pins

.

1.15 µA Standby mode + RTC

.

0.44 µA Stop mode 16 wakeup lines

.

1.4 µA Stop mode + RTC

.

8.6 µA Low-power run mode

.

185 µA/MHz Run mode

.

10 nA ultra-low I/O leakage

.

8 µs wakeup time

.

Core: ARM® Cortex® -M3 32-bit CPU

.

From 32 kHz up to 32 MHz max

.

1.25 DMIPS/MHz Dhrystone 2.1

.

Memory protection unit

.

Reset and supply management

.

Low-power, ultrasafe BOR brownout reset with 5 selectable thresholds

.

Ultra-low-power POR/PDR

.

Programmable voltage detector PVD

.

Clock sources

.

1 to 24 MHz crystal oscillator

.

32 kHz oscillator for RTC with calibration

.

High Speed Internal 16 MHz

.

Internal low-power 37 kHz RC

.

Internal multispeed low-power 65 kHz to 4.2 MHz

.

PLL for CPU clock and USB 48 MHz

.

Pre-programmed bootloader

.

USB and USART supported

.

Development support

.

Serial wire debug supported

.

JTAG supported

.

51 fast I/Os 42 I/Os 5V tolerant, all mappable on 16 external interrupt vectors

.

Memories

.

256 Kbytes of Flash memory with ECC

.

16 Kbytes of RAM

.

4 Kbytes of true EEPROM with ECC

.

20-byte backup register

.

LCD Driver for up to 8x28 segments

.

Analog peripherals

.

12-bit ADC 1Msps up to 20 channels

.

12-bit DACs 2 channels with output buffers

.

2x ultra-low-power-comparatorswindow mode and wakeup capability

.

DMA controller 12x channels

.

9x peripheral communication interfaces

.

1x USB 2.0 internal 48 MHz PLL

.

3x USARTs

.

Up to 8x SPIs 2x I2Ss, 3x 16 Mbits/s

.

2xI2Cs SMBus/PMBus

.

10x timers: 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers independent and window

.

CRC calculation unit