STM8L151K6U6

MCU STM8L 超低功耗 8位 LCD 32引脚 32kB

The medium-density STM8L151x4/6 and STM8L152x4/6 devices are members of the STM8L ultra-low-power 8-bit family. The medium-density STM8L15x family operates from 1.8 V to 3.6 V down to 1.65 V at power down and is available in the -40 to +85 °C and -40 to +125 °C temperature ranges.

The medium-density STM8L15x ultra-low-power family features the enhanced STM8 CPU core providing increased processing power up to 16 MIPS at 16 MHz while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.

The family includes an integrated debug module with a hardware interface SWIM which allows non-intrusive In-Application debugging and ultra-fast Flash programming.

All medium-density STM8L15x microcontrollers feature embedded data EEPROM and low-power, low-voltage, single-supply program Flash memory.

They incorporate an extensive range of enhanced I/Os and peripherals.

The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

Six different packages are proposed from 28 to 48 pins. Depending on the device chosen, different sets of peripherals are included.

All STM8L ultra-low-power products are based on the same architecture with the same memory mapping and a coherent pinout.

**Key Features**

.

Operating conditions

.

Operating power supply range 1.8 V to 3.6 V down to 1.65 V at power down

.

Temp. range: - 40 °C to 85, 105 or 125 °C

.

Low power features

.

5 low power modes: Wait, Low power run 5.1 μA, Low power wait 3 μA, Active-halt with full RTC 1.3 μA, Halt 350 nA

.

Consumption: 195 μA/MHz + 440 μA

.

Ultra-low leakage per I/0: 50 nA

.

Fast wakeup from Halt: 4.7 μs

.

Advanced STM8 core

.

Harvard architecture and 3-stage pipeline

.

Max freq. 16 MHz, 16 CISC MIPS peak

.

Up to 40 external interrupt sources

.

Reset and supply management

.

Low power, ultra-safe BOR reset with 5 selectable thresholds

.

Ultra-low-power POR/PDR

.

Programmable voltage detector PVD

.

Clock management

.

1 to 16 MHz crystal oscillator

.

32 kHz crystal oscillator

.

Internal 16 MHz factory-trimmed RC

.

Internal 38 kHz low consumption RC

.

Clock security system

.

Low power RTC

.

BCD calendar with alarm interrupt

.

Auto-wakeup from Halt w/ periodic interrupt

.

LCD: up to 4x28 segments w/ step-up converter

.

Memories

.

Up to 32 KB of Flash program memory and 1 Kbyte of data EEPROM with ECC, RWW

.

Flexible write and read protection modes

.

Up to 2 Kbyte of RAM

.

DMA

.

4 channels; supported peripherals: ADC, DAC, SPI, I2C, USART, timers

.

1 channel for memory-to-memory

.

12-bit DAC with output buffer

.

12-bit ADC up to 1 Msps/25 channels

.

T. sensor and internal reference voltage

.

2 ultra-low-power comparators

.

1 with fixed threshold and 1 rail to rail

.

Wakeup capability

.

Timers

.

Two 16-bit timers with 2 channels used as IC, OC, PWM, quadrature encoder

.

One 16-bit advanced control timer with 3 channels, supporting motor control

.

One 8-bit timer with 7-bit prescaler

.

2 watchdogs: 1 Window, 1 Independent

.

Beeper timer with 1, 2 or 4 kHz frequencies

.

Communication interfaces

.

Synchronous serial interface SPI

.

Fast I2C 400 kHz SMBus and PMBus

.

USART ISO 7816 interface and IrDA

.

Up to 41 I/Os, all mappable on interrupt vectors

.

Up to 16 capacitive sensing channels supporting touchkey, proximity, linear touch and rotary touch sensors

.

Development support

.

Fast on-chip programming and non intrusive debugging with SWIM

.

Bootloader using USART

.

96-bit unique ID