REF01CSZ
数据手册.pdfANALOG DEVICES REF01CSZ 电压基准, 精密, 系列 - 固定, REF01系列, 10V, NSOIC-8
参考电压，10V，Analog Devices
### 电压参考，Analog Devices
精密固定和可调电压参考 IC 利用串联、并联或串联/并联拓扑，并提供通孔和表面安装封装。 电压参考的初始准确度为 ±0.02 至 ±2%。
欧时:
参考电压，10V，Analog Devices### 电压参考，Analog Devices精密固定和可调电压参考 IC 利用串联、并联或串联/并联拓扑，并提供通孔和表面安装封装。 电压参考的初始准确度为 ±0.02 至 ±2%。
得捷:
IC VREF SERIES 1% 8SOIC
立创商城:
REF01CSZ
艾睿:
V-Ref Precision 10V 8mA 8-Pin SOIC N Tube
Jameco:
Voltage Reference Precision 10 Volt 8 mA 8-Pin SOIC N
安富利:
The REF01/REF02/REF03 series of precision voltage references provide a stable 10.0 V, 5.0 V, or 2.5 V output with minimal change in response to variations in supply voltage, ambient temperature or load conditions. The devices are available in 8-lead SOIC, PDIP, CERDIP, and TO-99 packages, as well as 20-terminal LCC packages 883 only, furthering the usability of the devices in both standard and high stress applications. With an external buffer and a simple resistor network, the TEMP terminal can be used for temperature sensing and approximation. A TRIM terminal is also provided on the device for fine adjustment of the output voltage. The small footprint, wide supply range, and application versatility make the REF01/REF02/REF03 series of references ideal for general-purpose and space-constrained applications. Newer designs should use the ADR01/ADR02/ADR03/ADR06 series of references, which offer higher accuracy and temperature stability over a wider operating temperature range, while maintaining full pin-for-pin compatibility with the REF01/REF02/REF03 series. This data sheet applies to commercial-grade products only. Contact sales or visit analog.com for military-grade 883 data sheets.
Chip1Stop:
V-Ref Precision 10V 8mA 8-Pin SOIC N Tube
TME:
Voltage reference source; 10V; ±1%; SO8; -40÷85°C; 8mA
Verical:
V-Ref Precision 10V 8mA 8-Pin SOIC N Tube
Newark:
# ANALOG DEVICES REF01CSZ Voltage Reference, Precision, Series - Fixed, REF01 Series, 10V, NSOIC-8
DeviceMart:
IC VREF SERIES PREC 10V 8-SOIC
Win Source:
Series Voltage Reference IC ±1% 8mA 8-SOIC 0.154", 3.90mm Width
