PG164140

电路内调试器/编程器, MPLAB PICkit 4, PIC/dsPIC器件

The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC and dsPIC flash microcontrollers, using the powerful graphical user interface of the MPLAB X Integrated Development Environment IDE, version 4.15. The MPLAB PICkit 4 is connected to the design engineer"s computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line SIL connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming ICSP. An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go. The MPLAB PICkit 4 programs faster than its predecessor and comes ready to support PIC® and dsPIC® MCU devices. Along with a wider target voltage, the PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backw

.

Matches silicon clocking speed, programming as fast as the device will allow

.

Wide target voltage range of 1.2V to 5.5V

.

Can supply up to 50mA of power to the target

.

Minimal current consumption at <100µA from target

.

Portable USB-powered via high-speed USB 2.0, no external power required

.

Can be powered from the target to program in the field coming soon via firmware update

.

CE and RoHS compliant

.

Supports advanced interfaces such as 4-wire JTAG and serial wire debug with streaming data gateway

.

Backwards compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP

.

Programmer-to-Go PTG support coming soon via firmware update

.

Ease of maintenance and feature upgrade