PIC18LF46K22-I/PT

MICROCHIP  PIC18LF46K22-I/PT  微控制器, 8位, 闪存, PIC18LFxxKxx, 64 MHz, 64 KB, 3.8 KB, 44 引脚, TQFP

PIC18F2xK22/4xK22 8 位闪存

得捷:
IC MCU 8BIT 64KB FLASH 44TQFP

欧时:
Microchip PIC18F 系列 MCU 8 bit PIC PIC18LF46K22-I/PT, 64MHz, 64 kB ROM 闪存, 1.024 kB、3.896 kB RAM, TQFP-44

立创商城:
PIC 64MHz 闪存：32K@x16bit RAM：3.8KB

艾睿:
MCU 8-bit PIC18 PIC RISC 64KB Flash 2.5V/3.3V 44-Pin TQFP Tray

Allied Electronics:
PIC18LF46K22-I/PT, 8bit PIC Microcontroller, 64MHz, 64kb Flash, 44-Pin TQFP

安富利:
PIC18LF46K22 offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price – with the addition of high-endurance, Flash program memory. On top of these features, the PIC18LF2X/4XK22 family introduces design enhancements that make these microcontrollers a logical choice for many highperformance, power sensitive applications.All of the devices in the PIC18LF2X/4XK22 family incorporate a range of features that can significantly reduce power consumption during operationAlternate Run Modes: By clocking the controller from the Timer1 source or the internal oscillator block, power consumption during code execution can be reduced by as much as 90%.Multiple Idle Modes: The controller can also run with its CPU core disabled but the peripherals still active. In these states, power consumption can be reduced even further, to as little as 4% of normal operation requirements.On-the-fly Mode Switching: The powermanaged modes are invoked by user code during operation, allowing the user to incorporate powersaving ideas into their application’s software design.Low Consumption in Key Modules: The power requirements for both Timer1 and the Watchdog Timer are minimized.All of the devices in the PIC18LF2X/4XK22 family offer ten different oscillator options, allowing users a wide range of choices in developing application hardware. These include: * Four Crystal modes, using crystals or ceramic resonators * Two External Clock modes, offering the option of using two pins oscillator input and a divide-by-4 clock output or one pin oscillator input, with the second pin reassigned as general I/O * Two External RC Oscillator modes with the same pin options as the External Clock modes * An internal oscillator block which contains a 16 MHz HFINTOSC oscillator and a 31 kHz LFINTOSC oscillator, which together provide eight user selectable clock frequencies, from 31 kHz to 16 MHz. This option frees the two oscillator pins for use as additional general purpose I/O. * A Phase Lock Loop PLL frequency multiplier, available to both external and internal oscillator modes, which allows clock speeds of up to 64 MHz. Used with the internal oscillator, the PLL gives users a complete selection of clock speeds, from 31 kHz to 64 MHz – all without using an external crystal or clock circuitBesides its availability as a clock source, the internal oscillator block provides a stable reference source that gives the family additional features for robust operation:Fail-Safe Clock Monitor: This option constantly monitors the main clock source against a reference signal provided by the LFINTOSC. If a clock failure occurs, the controller is switched to the internal oscillator block, allowing for continued operation or a safe application shutdown.Two-Speed Start-up: This option allows the internal oscillator to serve as the clock source from Power-on Reset, or wake-up from Sleep mode, until the primary clock source is available.

Chip1Stop:
MCU 8-bit PIC18 PIC RISC 64KB Flash 2.5V/3.3V 44-Pin TQFP Tray

Verical:
MCU 8-bit PIC18 PIC RISC 64KB Flash 2.5V/3.3V 44-Pin TQFP Tray

Newark:
# MICROCHIP  PIC18LF46K22-I/PT  8 Bit Microcontroller, Flash, PIC18LFxxKxx, 64 MHz, 64 KB, 3.8 KB, 44 Pins, TQFP

儒卓力:
**PIC18LF 64K TQFP44 85°C **

Online Components:
MCU 8-bit PIC18 PIC RISC 64KB Flash 2.5V/3.3V 44-Pin TQFP Tray

DeviceMart:
IC PIC MCU 64KB FLASH 44TQFP