PD69104BILQ-TR

POE Controller 44V 57V 48Pin QFN EP

For new designs please consider the PD69104B1ILQ. ’s PD69104B Power over Ethernet PoE Manager enables network devices to share power and data over a single cable. The PD69104B PoE Manager chip is employed by both Ethernet switches and Midspans. The device integrates power, analog circuitry and state of the art control logic into a single 48-pin plastic QFN package. The PD69104B device is a 4 port, mixed-signal, high-voltage PoE Manager. The PD69104B supports 3 modes of operation:

**MSCC Extended Auto mode** – this is a stand-alone mode in which the PD69104B detects IEEE802.3af-2003 compliant PDs Powered Devices and IEEE802.3at-2009 High Power devices, ensuring safe power feeding and disconnection of ports based on a power management algorithm while employing a minimum of external components. 

**Semi Auto mode** – allows the host to control which devices are powered and which are not, as well as to communicate with the PD69104B and to configure it 

**Auto mode** – allows turning PDs on and off automatically. Used for systems with a full power supply. The PD69104B executes all real time functions as specified in the IEEE802.3af-2003 "AF" and IEEE802.3at High Power "AT" standards, including load detection, "AF" and "AT" classifications, and using Multiple Classification Attempts MCA.

The PD69104B, supports detect legacy/pre-standard PD devices. It also provides PD real-time protection through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit. The PD69104B supports supply voltages between 44V and 57V with no need for additional power supply sources and has a built-in thermal protection. The PD69104B is a low power device that uses internal MOSFETs and external 0.36? sense resistors. The PD69104B is available in 48 leads, 8 mm x 8 mm QFN package.