PN5120A0HN1/C1,157

NFC/RFID Read/Write 13.56MHz 32Pin HVQFN EP Tray

RFID 阅读器/应答器 IC 13.56MHz FeliCa，ISO 14443，MIFARE，NFC I²C，SPI，UART 2.5V ~ 3.6V 32-VFQFN 裸露焊盘

得捷:
IC RFID RDR/TRAN 13.56MZ 32HVQFN

立创商城:
PN5120A0HN1/C1,157

艾睿:
NFC/RFID Read/Write 13.56MHz 32-Pin HVQFN EP Tray

安富利:
The PN512 is a highly integrated transceiver IC for contactless communication at 13.56 MHz. This transceiver IC utilizes an outstanding modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz.The PN512 is available in three versions: The PN512 transceiver ICs support 4 different operating modes: Enabled in Reader/Writer mode for ISO/IEC 14443A/MIFARE, the PN512’s internal transmitter part is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/ MIFARE cards and transponders without additional active circuitry. The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO/IEC 14443A/MIFARE compatible cards and transponders. The digital part handles the complete ISO/IEC 14443A framing and error detection Parity and CRC.Enabled in Reader/Writer mode for FeliCa, the PN512 transceiver IC supports the FeliCa communication scheme. The receiver part provides a robust and efficient implementation of the demodulation and decoding circuitry for FeliCa coded signals. The digital part handles the FeliCa framing and error detection like CRC. The PN512 supports contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.The PN512 supports all layers of the ISO/IEC 14443B reader/writer communication scheme, given correct implementation of additional components, like oscillator, power supply, coil etc. and provided that standardized protocols, e.g. like ISO/IEC 14443-4 and/or ISO/IEC 14443B anticollision are correctly implemented.In Card Operation mode, the PN512 transceiver IC is able to answer to a reader/writer command either according to the FeliCa or ISO/IEC 14443A/MIFARE card interface scheme. The PN512 generates the digital load modulated signals and in addition with an external circuit the answer can be sent back to the reader/writer. A complete card functionality is only possible in combination with a secure IC using the S²C interface.Additionally, the PN512 transceiver IC offers the possibility to communicate directly to an NFCIP-1 device in the NFCIP-1 mode. The NFCIP-1 mode offers different communication mode and transfer speeds up to 424 kbit/s according to the Ecma 340 and ISO/IEC 18092 NFCIP-1 Standard. The digital part handles the complete NFCIP-1 framing and error detection.Various host controller interfaces are implemented: A purchaser of this NXP IC has to take care for appropriate third party patent licenses.

Chip1Stop:
Transmission Module 1TX 1RX 10Mbps 32-Pin HVQFN EP Tray

Verical:
NFC/RFID Read/Write 13.56MHz 32-Pin HVQFN EP Tray