PIC16LF1906-E/SO

14KB Flash, 512B RAM, LCD, 11x10b ADC, EUSART, NanoWatt XLP 28 SOIC 0.3in TUBE

* C Compiler Optimized Architecture * Only 49 Instructions * Up to 14 Kbytes Self-Write/Read Flash Program Memory Addressing * Up to 256 Bytes Data Memory Addressing * Operating Speed: - DC – 20 MHz clock input @ 3.6V - DC – 16 MHz clock input @ 1.8V - DC – 200 ns instruction cycle * Interrupt Capability with Automatic Context Saving * 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset * Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers FSRs - FSRs can read program and data memory Flexible Oscillator Structure: * 16 MHz Internal Oscillator Block: - Accuracy to ± 3%, typical - Software selectable frequency range from 16 MHz to 31.25 kHz * 31 kHz Low-Power Internal Oscillator * Three External Clock modes up to 20 MHz * Two-Speed Oscillator Start-up * Low-Power RTC Implementation via LPT1OSC Special Microcontroller Features: * Operating Voltage Range: - 1.8V-3.6V * Self-Programmable under Software Control * Power-on Reset POR * Power-up Timer PWRT * Low-Power Brown-Out Reset LPBOR * Extended Watchdog Timer WDT * In-Circuit Serial Programming™ ICSP™ via Two Pins * In-Circuit Debug ICD via Two Pins * Enhanced Low-Voltage Programming LVP * Programmable Code Protection * Power-Saving Sleep mode Extreme Low-Power Management PIC16LF1904/6/7 with nanoWatt XLP: * Sleep mode: 30 nA @ 1.8V, typical * Watchdog Timer: 300 nA @ 1.8V, typical * Timer1 Oscillator: 500 nA @ 1.8V, typical Analog Features: * Analog-to-Digital Converter ADC: - 10-bit resolution, up to 14 channels - Conversion available during Sleep - Dedicated ADC RC oscillator - Fixed Voltage Reference FVR as channel * Integrated Temperature Indicator * Voltage Reference module: - Fixed Voltage Reference FVR with 1.024V and 2.048V output levels Peripheral Highlights: * Up to 36 I/O Pins and 1 Input-only Pin: - High current 25 mA sink/source - Individually programmable weak pull-ups - Individually programmable interrupt-onchange IOC pins * Integrated LCD Controller: - At least 19 segment pins and as many as 116 total segments - Variable clock input - Contrast control - Internal voltage reference selections * Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler * Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Dedicated low-power 32 kHz oscillator driver * Enhanced Universal Synchronous Asynchronous Receiver Transmitter EUSART: - RS-232, RS-485 and LIN compatible - Auto-Baud Detect - Auto-wake-up on start