MC9RS08KA2CDB
数据手册.pdf其他系列 10MHz 闪存:2K@x8bit RAM:63Byte
Overview
RS08KA microcontrollers MCUs are general-purpose 8-bit devices for the ultra-low-end market. Featuring RS08 architecture, RS08KA devices are specifically crafted to be more efficient and cost effective for small memory size microcontrollers. The MC9RS08KA MCU is a general-purpose device that can be used in a wide variety of applications, including high-brightness light-emitting diodes LEDs, lighting system controls, small handheld devices, toys, AC line voltage monitoring and simple logic, analog drivers and ASIC replacements. It’s ideal for transitioning from solid-state relays and switching systems to a full electronic solution.
MoreLess
## Features
### 8-bit RS08 Central Processor Unit CPU
* Up to 10 MHz bus frequency RS08 CPU at 1.8 volts for 100 ns minimum instruction time
* Subset of HC08 instruction set with added BGND instruction
* Supports tiny/short address mode
* Index addressing scheme through memory mapped registers X and D[X] within the tiny address range
* 14 byte code-efficient RAM
* X and D[X] mapped within code-efficient tiny address space
* 16 byte code-efficient peripheral register space
* Page window
* Simplified interrupt mechanism
* Subroutine call/return mechanism
### Integrated Third-Generation Flash
* Extremely fast, byte-writable programming— up to 20 µs/byte
* Offers 1 KB write/erase cycles minimum over temperature
### Flexible Clock Options
* Internal clock source module containing a frequency-locked loop FLL controlled by internal or external reference
* Precision trimming of internal reference allows typical 0.2 percent resolution and +1 percent to -1 percent deviation over operating temperature and voltage
* Internal reference clock can be trimmed from 31.25 kHz to 39.065 kHz, allowing for maxim 10 MHz Bus frequency output
### Timer
* 2 x 8-bit modulo timer with 8-bit prescaler
* 2-ch., 16-bit timer/PWM
* Allows external timer clock source
### ADC
* 12-ch., 10-bit resolution
* 2.5 µs conversion time; automatic compare function
* Trigger conversion using RTI counter
### Analog Comparator
* Option to compare to internal reference
* Option to route comparator output directly to pin
* Allows operation in MCU STOP mode
### I2C
* Inter-integrated circuit bus module capable of operation up to 100 kbps with maximum bus loading
### Real-Time Interrupt
* Real-time interrupt trigger with 3-bit prescaler
* Built-in low-power 1 kHz clock source
### Up to 18 GPIOs
* Software selectable pull-ups on ports when used as input internal pull-up on RESET
* Software selectable slew rate control on ports when used on output
* 8-pin keyboard interrupt module with software selectable polarity on edge or edge/level modes
### System Protection
* Watchdog computer operating properly COP reset with option to run from dedicated 1 kHz internal clock source or bus clock
* Low voltage detection with reset or interrupt
* Illegal opcode and illegal address detection with reset
* Security feature for flash
### Background Debugging System
* On-chip BDM
### Package
* Pin-compatible with SH, QG family