MC56F8367VPYE

NXP  MC56F8367VPYE  芯片, 数字信号控制器, 16位, 60MHZ, 576KB, 3.6V, LQFP-160

The is a Digital Signal Controller belong to the 56800E core-based DSC family. It combines digital signal processing and microcontroller functionalities on a single chip, with a flexible set of peripherals. The 56800E core is based on a Harvard-style architecture consisting of three execution units operating in parallel, allowing as many as six operations per instruction cycle. The MCU-style programming model and optimized instruction set allow straightforward generation of efficient, compact DSP and control code. The instruction set is also highly efficient for C/C++ compilers to enable rapid development of optimized control applications. It supports program execution from internal or external memories. Two data operands can be accessed from the on-chip data RAM per instruction cycle. This device also provide two external dedicated interrupt lines and up to 76 general purpose input/output GPIO lines, depending on peripheral configuration.

.

Access up to 4MB of OFF-chip program and 32MB of data memory

.

Up to 60 MIPS at 60MHz execution frequency

.

Chip select logic for glueless interface to ROM and SRAM

.

JTAG/EOnCE for unobtrusive real-time debugging

.

Up to two FlexCAN CAN Version 2.0 B-compliant

.

Two serial communication interfaces SCIs

.

Up to two serial peripheral interfaces SPIs

.

Two dedicated external interrupt pins

.

Software-programmable phase-lock loop