MC9S08PT16AVLD
数据手册.pdfNXP(恩智浦)
微处理器
NXP MC9S08PT16AVLD 微控制器, 8位, EEPROM含TSI, MC9S08, 20 MHz, 16 KB, 2 KB, 44 引脚, LQFP
The is a 8-bit Microcontroller based on enhanced S08 CPU 20MHz bus with CISC architecture operates at a maximum frequency of 20MHz. The device incorporates 16kB internal flash, 2kB internal RAM, 256byte EEPROM, 12-channel 12-bit A/D converter and 37 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit IIC bus module to operate at up to 100kbps and one serial peripheral interface modules SPI.
- .
- Supporting up to 40 interrupt/reset sources
- .
- Supporting up to 4-level nested interrupt
- .
- Flash and RAM access protection
- .
- One low-power stop mode; reduced power wait mode
- .
- Peripheral clock enable register can disable clocks to unused modules
- .
- Loop-controlled pierce oscillator XOSC
- .
- Internal clock source ICS - Containing a frequency-locked-loop FLL
- .
- Watchdog with independent clock source
- .
- Low-voltage detection with reset or interrupt - selectable trip points
- .
- Illegal opcode detection with reset
- .
- Illegal address detection with reset
- .
- Single-wire background debug interface
- .
- Breakpoint capability to allow three breakpoints setting during in-circuit debugging
- .
- On-chip in-circuit emulator ICE debug module
- .
- One analog comparator with both positive and negative inputs
- .
- Programmable cyclic redundancy check module CRC
- .
- 3 x Flex timer modulators modules
- .
- 2 x Modulo timer with 8-bit prescaler and overflow interrupt
- .
- TSI - Supporting up to 16 external electrodes
- .
- 2 x 8-bit Keyboard interrupt module KBI