MAX96711GTJ/V+

SerDes, 串行化器, 1.5 Gbps, CMOS, LVCMOS, CML, TQFN, 32 引脚

The from Products is a 14bit GMSL serializer with high immunity/bandwidth mode and coax/STP cable drive in 32 pin TQFN package. This compact serializer with features especially suited for automotive camera applications. In high bandwidth mode, the parallel clock maximum is 116MHz for 12bit linear or combined HDR data types. Line fault circuitry detects open/short faults on the link cable. The embedded control channel operates at 9.6Kbps to 1Mbps in UART, I2C and mixed UART/I2C modes, allowing programming of serializer, deserializer and camera registers independent of video timing. For driving longer cables, the IC has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V and the I/O supply range is 1.7V to 3.6V.

.

Meets AEC-Q100 automotive specification

.

Ideal for safety camera application, 12.5MHz to 87MHz x 12-Bit + H/V data

.

Works with low cost 50 ohm coax 100 ohm STP cable

.

Error detection of video/control data, up to 1.74Gbps serial bit rate

.

High immunity mode for robust control channel EMC tolerance

.

Retransmission of control data upon error, detection reduces EMI and shielding requirements

.

93mA maximum best in class supply current, pre/deemphasis allows 15m cable at full speed

.

High speed data serialization for megapixel cameras, 50% clock duty cycle

.

±8KV contact and ±15KV air IEC 61000-4-2 and ISO 10605 ESD protection

.

Operating temperature range from -40°C to +115°C, programmable output spread spectrum