MIC5801YV

; Device Type: Latched; Supply Voltage Min: 5V; Supply Voltage Max: 12V; Termination Type: SMD; Package/Case: PLCC; N...

The is a 8-bit parallel-input Latched Driver with a 5V supply, it will typically operate at better than 5MHz. The latched driver is high-voltage, high-current integrated circuits comprised of four or eight CMOS data latches, a bipolar Darlington transistor driver for each latch and CMOS control circuitry for the common CLEAR, STROBE and OUTPUT ENABLE functions. The bipolar/MOS combination provides an extremely low-power latch with maximum interface flexibility. Data input rates are greatly improved in this device. With a 12V supply, significantly higher speeds are obtained. The CMOS inputs are compatible with standard CMOS, PMOS and NMOS circuits. TTL or DTL circuits may require the use of appropriate pull-up resistors. It has open-collector outputs and integral diodes for inductive load transient suppression. The output transistors are capable of sinking 500mA and will sustain at least 50V in the OFF state.

.

4.4MHz Minimum data input rate

.

High-voltage, current sink outputs

.

Output transient protection

.

CMOS, PMOS, NMOS and TTL compatible inputs

.

Internal pull-down resistors

.

Low-power CMOS latches