MAX147AEAP+T
数据手册.pdfADC Single SAR 133KSPS 12Bit Serial 20Pin SSOP T/R
* 8-Channel Single-Ended or 4-Channel Differential Inputs * Single-Supply Operation * +2.7V to +3.6V MAX146 * +2.7V to +5.25V MAX147 * Internal 2.5V Reference MAX146 * Low Power * 1.2mA 133ksps, 3V supply * 54µA 1ksps, 3V supply * 1µA power-down mode * SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface * Software-Configurable Unipolar or Bipolar Inputs * 20-Pin DIP/SSOP Packages
得捷:
IC ADC 12BIT SAR 20SSOP
立创商城:
MAX147AEAP+T
安富利:
The MAX146/MAX147 12-bit data-acquisition systems combine an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. The MAX146 operates from a single +2.7V to +3.6V supply; the MAX147 operates from a single +2.7V to +5.25V supply. Both devices" analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation.The 4-wire serial interface connects directly to SPI/ QSPI and MICROWIRE devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX146/MAX147 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions.The MAX146 has an internal 2.5V reference, while the MAX147 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage-adjustment range.These devices provide a hard-wired SHDN-bar pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX146/MAX147, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates.The MAX146/MAX147 are available in 20-pin DIP and SSOP packages.For 4-channel versions of these devices, see the MAX1246/MAX1247 data sheet.