MAX544BCPA+
数据手册.pdfMAXIM INTEGRATED PRODUCTS MAX544BCPA+ 数模转换器, 电压输出, 14 bit, 串行, 4.75V 至 5.25V, DIP, 8 引脚
The is a serial input, voltage output, 14bit digital to analogue converter DAC in 8 pin DIP package. This single channel DAC operates from a single +5V supply and provides 14bit performance ±0.15LSB INL and ±0.15LSB DNL over temperature without any adjustments. The DAC output is unbuffered resulting in a low supply current of 0.3mA and low offset error of 0.6mV. A 16bit serial word is used to load data into the DAC latch. The 10MHz, 3-wire serial interface is compatible with SPI/QSPI/MICROWIRE and it also interfaces directly with optocouplers for applications requiring isolation. A power-on reset circuit clears the DAC output to 0V unipolar mode when power is initially applied. The MAX544B is used in digital offset and gain adjustment, automated test equipment and data acquisition systems.
- .
- Supply voltage range is 4.75V to 5.25V
- .
- Operating temperature range from 0°C to 70°C
- .
- Low power of 1.5mW
- .
- Power supply rejection of ±1LSB 4.75V
- .
- Output settling time of 1µs
- .
- Unbuffered voltage output directly drives 60Kohm loads
- .
- Reference -3dB bandwidth of 1MHz and voltage output slew rate of 25V/µs CL = 10pF
- .
- Schmitt trigger inputs for direct optocoupler interface
- .
- Pin compatible 16bit upgrade to MAX541 device
- .
- Gain error of ±5LSB and gain error tempco of ±0.1ppm/°C