MAX509BCWP+
数据手册.pdfMaxim Integrated(美信)
主动器件
MAXIM INTEGRATED PRODUCTS MAX509BCWP+ 数模转换器, 轨至轨输出, 8 bit, 串行, 4.5V 至 5.5V, -5.5V 至 0V, WSOIC, 20 引脚
The is a quad, serial 8bit digital to analogue DAC with rail to rail outputs in 20 pin WSOIC package. It has four separate reference inputs allowing DAC"s full-scale range to be set independently. Device communicates with microprocessors through a synchronous, full-duplex, 3-wire interface. Data is sent MSB first and can be transmitted in one 4-bit and one 8-bit packet or in one 12-bit word. If a 16-bit control word is used, the first four bits are ignored. A 4-wire interface adds a line for LDAC and allows asynchronous updating. The serial clock SCLK synchronizes the data transfer. Data is transmitted and received simultaneously.
- .
- Supply voltage range is 4.5V to 5.5V, -5.5V to 0V
- .
- Operating temperature range from 0°C to 70°C
- .
- Output buffer amplifier swing rail to rail
- .
- Reference input range includes both supply rails
- .
- Calibrated offset, gain and linearity 1LSB TUE
- .
- 10MHz serial interface, compatible with SPI, QSPI CPOL = CPHA = 0 and MICROWIRE
- .
- Double-buffered registers for synchronous updating
- .
- Serial data output for daisy-chaining
- .
- Power-on reset clears serial interface and sets all registers to zero