MAX489EPD+

MAXIM INTEGRATED PRODUCTS  MAX489EPD+  芯片, RS422/RS485 收发器, 250KBPS, 5.25V, DIP-14

The is a low power, slew rate limited RS485/RS422 transceiver in 14 pin NSOIC package. It contains one driver and one receiver. This reduced slew rate driver minimizes EMI and reduces reflections caused by improperly terminated cables, thus allowing error free data transmission up to 250Kbps. The driver is short circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. It features fail-safe circuitry which has a logic high receiver output when the receiver input is open.

.

Supply voltage range from 4.75V to 5.25V

.

Operating temperature range from -40°C to 85°C

.

Designed for full duplex communication

.

Features receiver/driver enable function

.

Quiescent current is 120µA

.

Allows up to 32 transceivers on the bus