MAX4906EFELB+T

MAXIM INTEGRATED PRODUCTS  MAX4906EFELB+T  模拟开关, SPDT, 2 放大器, 7 ohm, 2.7V 至 3.6V, µDFN, 10 引脚

The is a high /full speed USB 2.0 switch in 10 pin µDFN package. This ESD -protected analogue switch combines the low on capacitance CON and low on-resistance RON necessary for high performance switching applications. Device is designed for USB 2.0 high speed applications at 480Mbps. This switch will also handle all requirements for USB low and full speed signalling. It features two single-pole/double-throw SPDT switch Device is fully specified to operate from a single +3V to +3.6V power supply and is protected against a +5.5V short to all analogue inputs COM_, NC_,NO_. This feature makes it fully compliant with USB 2.0 specification of +5.5V fault protection. It features a low threshold voltage and a +1.4V VIH, permitting it to be used with low voltage logic. It is used in GPS, notebook computers, relay replacements, USB switching, Ethernet switching, video switching, Bus switches and T3/E3 switches for redundancy protection.

.

Quiescent supply current is 1000µA max at V+ = 3.6V, VIN = 0

.

Operating temperature range from -40°C to 85°C

.

500MHz typ -3dB bandwidth

.

Low bit to bit skew

.

Low supply current 3µA max in standby

.

±15kV human body model ESD protection on COM_

.

Low 4ohm typ, 7ohm max on-resistance RON

.

Charge pump noise is 90µV typ, charge pump enable

.

No need for logic-level shifters for 1.4V or above